PENNTROWEL Vinyl Ester 60/60 MR Lining is a 60 – 65 mil vinyl ester-based monolithic lining system. The system consists of a penetrating primer, followed by a 60 mil trowel applied base coat. An optional final topcoat can be added to seal the lining and adjust finished surface texture.
To upgrade the system, PENNTROWEL Vinyl Ester 60 MR can be specified. This option incorporates a glass mat reinforcement layer and saturant over the primer to minimize crack transmission into the lining in the event cracks emanate from the concrete.
For immersion service it is suggested to specify the upgraded MR system. PENNTROWEL Vinyl Ester 60 MR Lining has been formulated to perform in chemical immersion, as well as splash and spill. The system can perform well in the wide range of temperatures common to sumps, trenches, pits and vessels. Consult Corrosion Engineering specification CES-352 for complete usage and installation details.
Uses
- PENNTROWEL Vinyl Ester 60 MR Lining is used to protect concrete and steel substrates in trenches, pits, vessels, sumps, manways, and floors – both in and out of doors, that are subjected to a wide variety of corrosive agents.
- It is ideal as a secondary containment lining.
NOTE: Specify the used of PENNTROWEL Vinyl Ester 60 MR Carbon Grade in hydrofluoric acid or hot caustic chemical service. Consult Corrosion Engineering for details.
Features
- Excellent physical properties.
- Extremely low absorption and shrinkage.
- Excellent chemical resistance.
- Reinforcing adds strength thus reducing the possibility of cracking.
